Portable Shed Support Base - Suitable for the Access Ranges ONLY* - 

The Asgard easy-fit portable shed base is the perfect solution for all new Asgard shed owners*!  Asgard sheds are made from tough, heavy-weight, Galvanised steel, making our Garden sheds &  bike storage the best on the market.  All Asgard sheds are precision-made and so need a good, strong, firm level base to ensure an easy installation and the smooth operation of the locks and doors.  For many years now, we have recommended that all our sheds go onto a concrete or tarmac surface.  Which is still very much the case!!    But …

Sheds without a foundation base

…. You might not want the hassle of digging up your garden, or you have a half-decent base down already that's not quite good enough.... well, the design team at Asgard has developed an easy-to-use portable freestanding base system for sheds.

Shed base with minimal groundwork.

Setting up is super easy. You need to pop some flags down (one for each corner and make sure these are on a sound foundation and as flat as possible.  This is quicker than a full concrete base; this can be as easy as four flagstones or small dig-outs filled with postcrete in each corner.   Postcrete is a really easy way to do this.

Calling all Landlords & Tenants

Do you rent ot lease a property, BUT you really want an Asgard shed, but don't want to dig up someone else's (or don't want your tenants to) garden, causing damage and leaving a permanent concrete slab behind?   Try our portable shed base, quick and easy installation, with minimum ground works, and when you leave the property, you can take it with you!

Asgard Sheds, now Perfect for angled or sloped driveways - without digging up your drive.

The portable shed base is Perfect for driveways.   You have just had your drive done, there is no way you are going to dig it up for a shed, so the easy-fit shed base is perfect, just drop it in place and adjust the leveling feet!!

Then…  slide the chunky 100mm legs into place on the frame, and screw them in as level as you can by eye (each screw position gives you 25mm of adjustment (maximum of 50 mm).  Once the base looks pretty close to level,  a further 10mm of fine adjustment is available through the feet, a simple turn or two, and you can get your base super level.

Once level, then it's a build as normal,  just bolt your base to the frame, and build your Asgard as per the supplied instructions.

"This is a design we have been considering for a long time.  Asgard sheds are approved and accredited, and so precision-made.  A flat surface is key to a good installation and smooth lock operation; the simple drop-and-adjust nature of this design works really well.  I’ve been thinking about this design for a while.  It just works"!  Chris – Asgard Designer.

Top tip:

Asgard sheds are built inside out, which, when on the floor, will often mean standing inside your shed (our videos show this). If building on one of our shed frames, we always recommend you purchase the subfloor to sit inside the shed once done to ensure the base is as strong as it can be.

We would always recommend using the base frame in conjunction with a wooden subfloor. This should be fitted once the unit has been built and before use.

You can not fit the subfloor during the build, only once it has been built (you need access to all the base fitting holes)

*Please Note:

Currently, this easy shed base system is limited to our Access bike, caravan, and garden storage ranges only!

This base will only fit these models:

Bike version

Access Bike Shed - here

Garden version

7x4 Access Garden Shed - here

Caravan Version

7x4 Access Caravan Storage - here

Traditional shed base instructions and advice 

Product Code: ASGFRAACC